vpn client authentication.

[nivanak]

hi!

i configured vpn on pix firewall.

easyvpn server.

but, after configuring vpn, only one people connet private network with vpn.

another people want to connet private network , but do not permit login.

my configuring is

vpngroup xxxx address-pool vpnpool1

vpngroup xxxx dns-server wwwserver 111.111.111.111

vpngroup xxxx wins-server wwwserver

vpngroup xxxx default-domain cisco.com

vpngroup xxxx split-tunnel vpn

vpngroup xxxx idle-time 1800

vpngroup xxxx password ********

how do i configure on firewall ?

my vpn client users are 10 people.

thanks.

[smahbub]

How many addresses are there in your pool, vpnpool1? I think if you do not have enough IP addresses, more clients may not be able to connect. Make sure you have at least 10 IP addresses in the pool of addresses that you define.