02-11-2014 10:03 PM - edited 03-10-2019 09:23 PM
Hi, I'm using ISE and I want to redirect https traffics to one web-page.
so I used cisco-av-pair = url-redirect=test123
also, test123 is existed in WLC with
deny https any
deny any https
permit ip any any
however, it does not redirect to the web-page.
after client is accessed to wifi, when I see client on wlc, redirect-url is not applied but aaa-overide acl is applied to test123
anyone know why ?
I'm using ISE 1.2.0.899 with 1,2,3,4,5 patches
and wlc 7.4.115
02-12-2014 10:04 PM
Did u check the firewall to see if it may be blocking port 8443?
please have a look on this discussion:
02-12-2014 10:07 PM
alsolutely not blocking any port. I ONLY HAVE REDIRECT-ACL from AUTHZ profile
but when it goes to wlc, it becane aaa-overide acl.
02-18-2014 03:52 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide