cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
764
Views
0
Helpful
1
Replies

How to get authentication sessions interface data using SNMP oid?

Naiem Rahman
Level 1
Level 1

Trying to get the authentication sessions information using for end device connected to switch. Using the command below I can get the authentication sessions info. for the endpoints connected to the port. I am looking to get this similar information using SNMP command and the oid I need to get those information

>> show authentication sessions interface Gi8/0/35 details

Interface: GigabitEthernet8/0/35
IIF-ID: 0x12CF0091
MAC Address: xxxx.xxxx.xxxx
IPv6 Address: Unknown
IPv4 Address: 10.xx.xx.xx
User-Name: xx-xx-xx-xx-xx-xx
Status: Authorized
Domain: DATA
Oper host mode: multi-auth
Oper control dir: both
Session timeout: 43200s (server), Remaining: 36852s
Timeout action: Reauthenticate
Acct update timeout: 172800s (local), Remaining: 23375s
Common Session ID: 1B00020A0000033658CE82EF
Acct Session ID: 0x0000027e
Handle: 0xb800024a
Current Policy: xyz


Server Policies:
Session-Timeout: 43200 sec
Vlan Group: Vlan: 200
ACS ACL: xACSACLx-IP-PERMIT_ALL_IPV4_TRAFFIC-57f6b0d3
SGT Value: 19


Method status list:
Method State
dot1x Stopped
mab Authc Success

1 Reply 1

pieterh
VIP
VIP

try this link to search for the desired fields  Cisco SNMP Object Navigator
you probably need multiple queries to retrieve all the fields above