LMS 4.0 VLAN Config Fetch Failed

[xcz504d1114]

I know this is something easy, but for the life of

me I cannot find where to make the change.

Selected Protocols with order ==> SSH,Telnet,TFTP

Command failedTELNET: Failed to establish TELNET connection

I obviously do not allow Telnet to this device, and it should be pulling with SSH, the selected protocol order is correct, I have the same order for all 4 of the config transport settings (Archive Mgmt, Config Editor, NetConfig, NetShow). Any ideas why this is happening to 2000 devices?

The daemon manager has been stopped and started numerous times since these devices have been added to the database, and the server rebooted at least twice, so I believe it is a configuration issue on my part.

Thanks in advance,

Craig Miller

[Joe Clarke · Accepted solution]

Likely your error also contains the string "Command failed".  What is most likely happening if that when LMS logs into the device to fetch the VLAN config, the "copy flash:vlan.dat tftp:" command is failing.  For LMS to be able to fetch the VLAN config, TFTP must be alowed from device to server.

[xcz504d1114]

Joseph, as always, you are the man, firewall rule blocking TFTP.

Thanks,

Craig