Prime Infrastructure 2.1. Configuration template deploy problem.
Hello! I have a problem with the CLI template deployment on Cisco Prime. PI version is 2.1.
There is the following template, which contains:
logging on logging 10.10.10.10
When I try to deploy it on the router 1800 IOS Version 12.3(14)T7 all is going well and the report I get the following:
configlet: logging on logging 10.10.10.10 response: terminal width 0 config t logging on logging 10.10.10.10
But, when I try to deploy the same template on the router 3825 IOS Version 15.1(4)M5, the system issues the following error:
Error : Exception while sending interactive commands to device, Expect timeout: Failed to match expected device output due to Expect timeout current timeout 60000. Current output : Enter configuration commands, one per line. End with CNTL/Z. MAIN_VOICE_gate(config)# Current expects : (MAIN_VOICE_gate:579|MAIN_VOICE_gate:579)\([^\)]+\)#\s*\z MAIN_VOICE_gate:579#
In what may be the reason that Prime cannot deploy the configuration on IOS version 15.1?
. My work contains abbundance of networking gear.i have 3945 routers with attatched nme,3850 switches 48 gig port with 4 tengig port,3850 switch with 16 fiber ports, fortigate 600d along with servers with 8tbs of free space.if you have any labs for me id ...
Hello I have a network in prodcution like it mensionned in this picture. The customer wants to renovate the current infrastructure by changing all the hardware. For this reason we had think about deploying DNA Center and make automat...
I want to show how to quickly and reliably troubleshoot a network using notepad++.If you are not using Cisco GENIE and your network is not very big and you have several routers/switches only.For illustration, I created a simple topology.First, the loopbac...