4100 Setup Problem

[lupingyao]

I got the Setup again and again. Could someone tell me what is wrong with this machine?

 You have chosen to setup a new Security Appliance. Continue? (y/n): y

  Enforce strong password? (y/n) [y]: n

  Enter the password for "admin":
  Confirm the password for "admin":

  Enter the system name:  FP4100

  Supervisor Mgmt IP address : 10.9.18.88

  Supervisor Mgmt IPv4 netmask : 255.255.255.0

  IPv4 address of the default gateway : 10.9.18.1

  Configure the DNS Server IP address? (yes/no) [n]:

  Configure the default domain name? (yes/no) [n]:

  Following configurations will be applied:

    Switch Fabric=A
    System Name=FP4100
    Enforced Strong Password=no
    Supervisor Mgmt IP Address=10.9.18.88
    Supervisor Mgmt IP Netmask=255.255.255.0
    Default Gateway=10.9.18.1
    Ipv6 value=0

  Apply and save the configuration (select 'no' if you want to re-enter)? (yes/no): yes
  Applying configuration. Please wait.

variable defaultIpBlock has no value specified
  SAM configuration file is not Okay
  System will reboot shortly!
INIT: Sending all processes the TERM signal...
dmserver: 492:dmserver_exit:Waiting for irq thread to exit.

dmserver: 270:dm_scan_devices_irq:Error waiting on irq (select), error: Interrupted system call

dmserver: 500:dmserver_exit:Waiting for fastirq thread to exit.

Sending all processes the KILL signal...
Saving random seed:
Syncing hardware clock to system time WARNING from hwclock: The clock was in 11 minute mode, which normally means that something else, possibly an NTP daemon, has been setting the hardware clock.  Setting the clock with hwclock turns off 11 minute mode.  See hwclock documentation.

Unmounting file systems:  umount2: Device or resource busy
umount: /var/tmp: device is busy
umount2: Device or resource busy
umount: /var/tmp: device is busy

/var/tmp:           c
Unmounting file systems (retry):  umount2: Device or resource busy
umount: /var/tmp: device is busy
umount2: Device or resource busy
umount: /var/tmp: device is busy

/var/tmp:           c
Unmounting file systems (retry):  umount2: Device or resource busy
umount: /var/tmp: device is busy
umount2: Device or resource busy
umount: /var/tmp: device is busy

/var/tmp:           c
umount2: Device or resource busy
umount: /var/tmp: device is busy
umount2: Device or resource busy
umount: /var/tmp: device is busy
mount: you must specify the filesystem type
mount: /var not mounted already, or bad option
Please stand by while rebooting the system...
[ 1566.198154] Disconnected SATA Storage device(sda) from PCI bus
 [ 1610.034024] Restarting system.

!!  Rommon image verified successfully  !!



Cisco System ROMMON, Version 1.0.10, RELEASE SOFTWARE
Copyright (c) 1994-2015  by Cisco Systems, Inc.
Compiled Mon 11/30/2015 15:23:18.60 by builder
Current image running: Boot ROM0
Last reset cause: ResetRequest
DIMM Slot 0 : Present
DIMM Slot 1 : Present
No USB drive !!
..........BIOS has been locked !!

Platform FPR-4140-SUP with 8192 Mbytes of main memory
MAC Address: b0:aa:77:35:6f:2a

find the string ! boot bootflash:/installables/switch/fxos-k9-kickstart.5.0.3.N2.4.01.116.SPA bootflash:/installables/switch/fxos-k9-system.5.0.3.N2.4.01.116.SPA

Use BREAK, ESC or CTRL+L to interrupt boot.
Use SPACE to begin boot immediately.


Attempt autoboot: "boot bootflash:/installables/switch/fxos-k9-kickstart.5.0.3.N2.4.01.116.SPA bootflash:/installables/switch/fxos-k9-system.5.0.3.N2.4.01.116.SPA"
  !!   Kickstart Image verified successfully   !!

Linux version: 2.6.27.47 (security@cisco.com) #1 SMP Mon Dec 5 18:26:02 PST 2016
[    0.000000] Fastboot Memory at 0c100000 of size 201326592
Usage: init 0123456SsQqAaBbCcUu
INIT: POST INIT Starts at Fri Jul 21 11:31:12 UTC 2017
can't create lock file /var/lock/mtab~234: No such file or directory (use -n flag to override)
S10mount-ramfs.supnuovaca Mounting /isan 2500m
Mounted /isan
Creating /callhome..
Mounting /callhome..
Creating /callhome done.
Callhome spool file system init done.
Platform is BS or QP MIO: 31
FPGA Version 0x00010500 FPGA Min Version 0x00000600
Checking all filesystems..r... done.
Checking NVRAM block device ... done
.
FIPS power-on self-test passed
Unpack CMC Application software
Loading system software
Uncompressing system image: bootflash:/installables/switch/fxos-k9-system.5.0.3.N2.4.01.116.SPA


Manager image digital signature verification successful
C
11+1 records in
11+1 records out
8903 bytes (8.9 kB) copied, 4.617e-05 s, 193 MB/s
snm mode on SUP
INIT: Entering runlevel: 3
cmcmon: 159:cmclog_setlevel_module:CMC Log level
cp: cannot stat `/isan/bin/chassis3.img': No such file or directory
cp: cannot stat `/isan/plugin_img/fex.bin': No such file or directory
cp: cannot stat `/isan/plugin_img/fexth.bin': No such file or directory
cp: cannot stat `/isan/plugin_img/fex3.bin': No such file or directory

---------------------
enabled fc feature
---------------------
2017 Jul 21 11:33:27  %$ VDC-1 %$ %USER-2-SYSTEM_MSG: CLIS: loading cmd files begin  - clis
2017 Jul 21 11:33:36  %$ VDC-1 %$ %USER-2-SYSTEM_MSG: CLIS: loading cmd files end  - clis
2017 Jul 21 11:33:36  %$ VDC-1 %$ %USER-2-SYSTEM_MSG: CLIS: init begin  - clis
System is coming up ... Please wait ...
System is coming up ... Please wait ...
2017 Jul 21 11:34:11  %$ VDC-1 %$ %USER-0-SYSTEM_MSG: Starting bcm_attach - bcm_usd
System is coming up ... Please wait ...
System is coming up ... Please wait ...
2017 Jul 21 11:34:18  %$ VDC-1 %$ %USER-0-SYSTEM_MSG: Finished bcm_attach... - bcm_usd
2017 Jul 21 11:34:18  %$ VDC-1 %$ %USER-0-SYSTEM_MSG: Enabling Filter on CPU port  - bcm_usd
2017 Jul 21 11:34:20 switch %$ VDC-1 %$ %VDC_MGR-2-VDC_ONLINE: vdc 1 has come online
System is coming up ... Please wait ...
nohup: appending output to `nohup.out'

           ---- Basic System Configuration Dialog ----

  This setup utility will guide you through the basic configuration of
  the system. Only minimal configuration including IP connectivity to
  the Fabric interconnect and its clustering mode is performed through these steps.

  Type Ctrl-C at any time to abort configuration and reboot system.
  To back track or make modifications to already entered values,
  complete input till end of section and answer no when prompted
  to apply configuration.


  You have chosen to setup a new Security Appliance. Continue? (y/n):