Network Security

Hi Cisco Experts,We have two new ASA 5525-X and we are getting an error whenever we save or apply an SFR  policy."Error: This rule requires a Protection license, but the device does not have a Protect license"I've setup before a couple of ASA's with ...

Hi Experts, How the dynamic analysis occurred in AMP for endpoints android/linux/mac Connectors in threat grid as it has only windows 7 VM for analysis? Example: If a file detected in Android connectors, the file is unknown now where its dynamic anal...

Hi,I am looking for help on the followings:1. Some strong points which could be considered to win deals against Cisco competitors from pre-sales point of view. I am specifically looking for Cisco ASA vs (Palo Alto, Checkpoint, Fortinet). 2. What are ...

Hello freinds   with asa clusters , 2 asas in cluster , asa1 and asa2 , asa1 is the master with mgmt ip 192.168.254.250   the mgmt pool consists of pool 192.168.254.251-192.168.254.252   My Question ,when i need to add these cluster to ISE , what IP ...

Hi,   Our customer has a 50/50 internet connection, but they reach only 50 down / 12 up. The ISP told me that we need to configure bandwidth throttling on the outside interface to 48/48 to prevent this from happening.   I added the following in the A...

Firepower Management Center 6.2.2 is extremely slow to respond. Server is running on VMware vSphere 6.0 & ESXi. Here is the TOP information from the server:top - 12:55:06 up 67 days, 20:23,  1 user,  load average: 0.57, 0.45, 0.46Tasks: 119 total,   ...

Hello All,   Currently we have a customer who has SourceFire v4.10 and would like to configure the SourceFire devices to send syslog alerts to a syslog server. I have checked the Advanced Settings of the IPS Policy and there is no option to define if...

Hi, I don't want to use the default management interface configuration of my ASA5510 firewall. Can anybody share their ASA5510 management interface configuration for a home network. I appreciate your support in sharing your configuration. Thanks!

hi i recently purchased an asa 5510 i can ping the internet from asa but not from my laptop when connected though the firewall my laptop gets an ip and default dns AND gateway from laptop i can only ping firewall inside interface can you help me diag...

Hello All,   I am using Cisco ASA 5506X in production. Our ISP is AT&T DSL internet services. We have used a DSL modem and this modem is in a bridge mode. This internet works based on PPPoE with PAP authentication. We have been given username and pas...

which of these lldp commands are valid    1.show lldp 2.show lldp intercace fa 0/0 3.show lldp traffic 4.show lldp neighbours 5.show lldp neighbours detail 6.show lldp entry R1