09-16-2016 11:42 AM - edited 03-12-2019 01:17 AM
Hello guys ,
I am following this guide http://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118824-configure-firepower-00.html
for upgrading hardware Module but once tftp process completes its giving me Error at the end bad magic Number and then process stops .Please check Images for more info .
Edit: i have check file md5 checksum and also tried with another version of boot image but error remains same
Solved! Go to Solution.
09-17-2016 07:44 AM
It looks like you are trying to use the image meant for the models with software module. Your screen shot shows you are using "asasfr-5500x-boot-6.1.0-330.img".
For the 5585-X models with hardware SSP there is a different boot image.
According to the downloads page it should be "asasfr-boot-6.1.0-330.img" as found here:
https://software.cisco.com/download/release.html?mdfid=286271176&flowid=77248&softwareid=286277393&release=6.0.1.2&relind=AVAILABLE&rellifecycle=&reltype=latest
09-16-2016 02:26 PM
What's the current module version level? Please share the output of:
show module sfr detail
...from the ASA cli.
09-17-2016 04:24 AM
At present i have following information .
config)# show module
Mod Card Type Model Serial No.
---- -------------------------------------------- ------------------ -----------
0 ASA 5585-X Security Services Processor-20 wi ASA5585-SSP-20
1 ASA 5585-X FirePOWER SSP-20, 8GE ASA5585-SSP-SFR20
Mod MAC Address Range Hw Version Fw Version Sw Version
---- --------------------------------- ------------ ------------ ---------------
0 84b2.61b0.6cd8 to 84b2.61b0.6ce3 4.0 2.0(14)1 9.6(2)
1 84b2.61b0.6e10 to 84b2.61b0.6e1b 2.0 2.0(14)1 5.3.1-152
Mod SSP Application Name Status SSP Application Version
---- ------------------------------ ---------------- --------------------------
1 ASA FirePOWER Up 5.3.1-152
Mod Status Data Plane Status Compatibility
---- ------------------ --------------------- -------------
0 Up Sys Not Applicable
1 Up Up
09-17-2016 07:44 AM
It looks like you are trying to use the image meant for the models with software module. Your screen shot shows you are using "asasfr-5500x-boot-6.1.0-330.img".
For the 5585-X models with hardware SSP there is a different boot image.
According to the downloads page it should be "asasfr-boot-6.1.0-330.img" as found here:
https://software.cisco.com/download/release.html?mdfid=286271176&flowid=77248&softwareid=286277393&release=6.0.1.2&relind=AVAILABLE&rellifecycle=&reltype=latest
09-19-2016 02:19 PM
yes , you are correct , but in my navigation from main doc-cd page never landed me to the 5585 even if i click on 5585 it will give me result of 5555 anyway never mind your given link worked for me thanks .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide