827 adsl to pix

[y.johnny]

Hi all,

I have a really confusing problem

How can I connect a small office that is connected to the Internet vie

827 adsl router to a corporate pix firewall, and gain connectivity to the

Servers in the inside of the corporate network? All configurations I know

Are with serial links with known ip addresses on the outside.

Thanks in advance

[edadios]

you can do ipsec. you need an image on the router that has ipsec 56 image at least, and the same for the pix, an ipsec feature.

Here is a sample of an 827 doing ipsec to another router :

http://www.cisco.com/warp/public/471/vpn_pppoe.html .

And here is a router to pix ipsec :

http://www.cisco.com/warp/customer/110/39.html.

Regards,

[paqiu]

You can setup router to PIX Lan to Lan IPSEC tunnel.

So you can access from the network behind the 827 to the network behind the PIX.

Here is the sample config for that:

http://www.cisco.com/warp/customer/110/39.html