Hi,
I’ve got this PIX 520 the show version of which is below… I’m about to
install the PIX os 6.3, can I also install more interfaces, as per the PIX 6.3 OS I
should be able to go to 8 10/100 interfaces am I correct. ? Are these the same four
port and single port interfaces as the current PIX 525 / 515
Thanks and Regards
-Kevin.
sh ver
Cisco Secure PIX Firewall Version 5.2(1)
Compiled on Tue 22-Aug-00 23:35 by bhochuli
pixfirewall up 277 days 19 hours
Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz
Flash i28F640J5 @ 0x300, 16MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB
0: ethernet0: address is 0090.27a3.0d9b, irq 11
1: ethernet1: address is 0090.27a3.1a52, irq 10
Licensed Features:
Failover :Enabled
VPN-DES :Enabled
VPN-3DES :Disabled
Maximum Interfaces :6
Cut-through Proxy :Enabled
Guards :Enabled
Websense :Enabled
Throughput :Unlimited
ISAKMP peers :Unlimite
