Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I can't seem to get the General Deliver Mailbox assigned. Do I need to create a dummy ephone and tie that to the GDM? I am just trying to set a voicemail box for my company and thought that is what the GDM is for.Any help or direction?Thanks in adva...
Has anyone ever tried this; Bonded T1s with 8 channels of 1 T1 used for voice? I don't have much other information now so I am thinking that with CAS and PRI signaling this is doable however with PRI a MUX might be required.Any ideas?Thanks in advan...
I am having trouble running CME on the same router as my gateway. I can make calls just fine but can not recieve any calls.I believe I am having a dial-peer issue. Any help??Thanks,Curt
I can not seem to get my 2821 which is acting as my CME and Gateway to pass off inbound calls. I can make outbound calls. I believe I am having a dial-peer issue.Can anyone help with suggestions, links for sample configs.Thanks in advance,Curt
I am running a Call Manager Express with about 20 users. Sometimes when an external call,from the PSTN, is answered the line is ringing and finally the calling party answers? Is this a ring back problem and where do I start troubleshooting?Thanks in...
I have a PIX 501 with a verizon provided Westel DSL modem. I am required to use PPPOE and use the PIX for remote VPN access. I have a dynamic IP addres so I use DYNDNS.com and a domain name for VPN connections.You need a username and password. Her...
Thanks for the feed back this helps. Question:Does voice signaling become a problem and no MUX required? I thougth that with PRI signaling a MUX would be required however with CAS, no MUX?Thanks,Curt
It seems like I am having a Dial-peer issue. Here is my orginal Dial-peer plan. I have since then tried different methods.This plan is very similar to another installation I am running with 1 router for CME and 1 router for my gateway. and I have ...
I'm not sure its Hairpinning but, I have 1 router which is providing CME\CUE\Gateway with 12 FXO lines. I can make VoIP calls to the PSTN thru the Gateway. I can not recieve calls from the PSTN. The FXO port lights up and then disconnects. I beli...
Does anyone have a sample config or some links to doing this. I am trying to run CME and the H.323 Gateway on the same router but am not able to recieve inbound calls??Thanks
