ACS 5.2 authorisation profile with port bounce included

[vankeulen]

We are using ACS 5.2 with switch port configuration multi-auth and the option 'authentication open' for using WoL.

In case of MAB authentication with VLAN change and be sure the device is running dhcp in the correct VLAN

the port bounce would be a nice option. Is this possible ?

For example: the Radius attribute 'cisco-av-pair => subscriber:command=bounce-host-port' included in the authorisation profile.

[Bastien Migette]

You can do it with radius change of authorization CoA:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_52_se/configuration/guide/swauthen.html#wp1368192

Hope this help.