09-10-2020 10:26 PM
Hi guys,
We have a couple 9300 FTDs managed by a single 4600 FMC.
We are getting a second FMC in a few weeks and wanted to know how would I add it to the existing setup?
I can't find anything on Cisco's website.
What I'm thinking is:
1. Restore the new FMC with the existing FMC's configuration.
2. Remove the FTDs HA pair from the FMC
3. Setup HA for the FMC's
4. Add the FTDs back as a HA pair.
Has anyone tried to do this?
Thank you
Heino
Solved! Go to Solution.
09-28-2020 10:41 AM
FMC HA can be created without disturbing the already registered devices on the existing FMC. The primary FMC backup must not be restored to the secondary FMC.
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/firepower_management_center_high_availability.html
09-28-2020 10:41 AM
FMC HA can be created without disturbing the already registered devices on the existing FMC. The primary FMC backup must not be restored to the secondary FMC.
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/firepower_management_center_high_availability.html
09-28-2020 10:57 PM
Thank you for that. It is exactly what I was after. It does not seem to be a big job, I had myself prepared for the worst
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: