AIP-SSM interface

[uthayaman]

What does the interface configuration in AIP-SSM indicates ?

If this indicates that the traffics of this interface will be monitored, then what is the purpose of diverting traffic from asa though policy command.

[uthayaman]

Hi,

I did the change and it is working fine.

I want to upgrade the image of my AIP-SSM.I am using aip-ssm-40.Can you suggest which version i can use and steps to upgrade.

[Jennifer Halim]

I would suggest an upgrade to the latest version which is 7.0.2(E3). You can upgrade directly to that version if you are currently already running at least 5.1.6(E3).

To upgrade:

1) Download the upgrade package:

http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=7.0%282%29E3&mdfid=280432811&sftType=Intrusion+Prevention+System+%28IPS%29+System+Upgrades&optPlat=&nodecount=2&edesignator=null&modelName=Cisco+ASA+Advanced+Inspection+and+Prevention+%28...

2) Go to IDM: Configuration --> Sensor Management --> Update Sensor --> upload the upgrade package from your local computer and update it.

Hope it helps.