04-04-2012 09:58 PM - edited 03-11-2019 03:50 PM
Hi ALL
We are now using image 8.0(4) for my ASA 5510. Later on, I would like to upgrade the image to 8.4(3).
May I have to know what difference for those images, what should I take care of the script?
Hugo
Solved! Go to Solution.
04-04-2012 10:05 PM
Hi Hugo,
There are a few major differences as compared to NAT and ACL logic in the software versions 8.3 or later. I would suggest you go through the 8.4 release notes first, to understand the new features in it, and also go through the new NAT logic and syntax to make yourself familiar with it.
Here are a few links whioch wud help you:
https://supportforums.cisco.com/docs/DOC-12690#comment-7803
https://supportforums.cisco.com/docs/DOC-12324
https://supportforums.cisco.com/docs/DOC-9129#comment-3934
Hope that helps,
Thanks,
Varun
04-04-2012 10:05 PM
Hi Hugo,
There are a few major differences as compared to NAT and ACL logic in the software versions 8.3 or later. I would suggest you go through the 8.4 release notes first, to understand the new features in it, and also go through the new NAT logic and syntax to make yourself familiar with it.
Here are a few links whioch wud help you:
https://supportforums.cisco.com/docs/DOC-12690#comment-7803
https://supportforums.cisco.com/docs/DOC-12324
https://supportforums.cisco.com/docs/DOC-9129#comment-3934
Hope that helps,
Thanks,
Varun
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide