I have two ASA 5505's with Security Plus licenses on both.
I am trying to force them to becoming an HA pair using active/standby.
When I enable failover I get this message:
Mate's license (Licensed Cores ) is not compatible with my license (Licensed Cores ). Failover will be disabled.
Do I need to apply new licenses to the ASA's?
Device licence details (same on both):
Cisco Adaptive Security Appliance Software Version 8.2(1)
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 20, DMZ Unrestricted
Inside Hosts : Unlimited
Failover : Active/Standby
VPN-DES : Enabled
VPN-3DES-AES : Enabled
SSL VPN Peers : 2
Total VPN Peers : 25
Dual ISPs : Enabled
VLAN Trunk Ports : 8
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Linksys phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled
This platform has an ASA 5505 Security Plus license.
Many thanks
