10-25-2017 11:07 AM - edited 02-21-2020 06:34 AM
Hello All,
I am having some issues regarding ASA-5506 Firewall.
I currently have few routers and servers connecting to the outside with the following protocols on Cisco 2911's:
-OSPFv2 (Important)
- HTTP
-HTTPS
- FTP
-SFTP
- ETC
I have tried few different methods but i have many different errors. Finally I have restored the router to factory default.
My experience with CISCO Firewall is limited, but I need to get this going as fast as I can. I have configured the current network configuration using Cisco 2911's , but not the firewall. I greatly appreciate the help. thanks
10-25-2017 12:44 PM
Hello @sam.nikoukar
what do you need exactly? Do you need allow this protocol through the ASA?
Can you explain better what you need?
Also, provide show running-config of ASA and if possible some explanation about the flow ( from / to ).
If you have a draw even better.
-If I helped you somehow, please, rate it as useful.-
10-31-2017 05:41 AM
11-02-2017 05:48 AM
Hello,
Anyone can help me with my problem?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide