Unboxed a new ASA5506-X, powered up and started following the quick start guide. I don't have a inside switch and don't need the Firepower configured. I connected a PC to gi1/2, received an IP address 192.168.1.5. According to the Quick Start Guide, I should be able to browse to https://192.168.1.1/admin and launch the ASDM. I would also assume since I already have ASDM linstalled, I could run it directly and connect to 192.168.1.1.
This does not work as I get a page not found. I can ping 192.168.1.1.
Connected a console cable and did a dir and I don't see the ASDM image. This is all I have:
ciscoasa# dir all-filesystems
Directory of disk0:/
92 -rwx 69454656 13:24:42 Jun 23 2015 asa941-lfbff-k8.SPA
93 -rwx 33 13:28:50 Jun 23 2015 .boot_string
11 drwx 4096 13:27:18 Jun 23 2015 log
19 drwx 4096 13:28:24 Jun 23 2015 crypto_archive
20 drwx 4096 13:28:44 Jun 23 2015 coredumpinfo
94 -rwx 41836544 13:33:50 Jun 23 2015 asasfr-5500x-boot-5.4.1-211.img
7859437568 bytes total (4524847104 bytes free)
Directory of system:/
1 ---- 0 00:00:00 Jan 01 1970 running-config
No space information available
ciscoasa#
Do I need to copy the ASDM-743.bin to the firewall?
