Solved: ASA 5510 basic setup help

Lon · ‎10-20-2011

I have a ASA 5510 with asa8.4(2) and asdm6.4(5)205. Have a new basic config, nothing special at this time. I just cannot seem to get from the inside to the outside. From the outside interface I can ping, so I have a good Internet connection.

write term

: Saved

:

ASA Version 8.4(2)

!

hostname xxxxx

domain-name xxxxx

enable password xxxxx encrypted

passwd xxxxx encrypted

names

dns-guard

!

interface Ethernet0/0

nameif outside

security-level 0

ip address 69.x.x.82 255.255.255.240

!

interface Ethernet0/1

nameif inside

security-level 0

ip address 10.1.0.2 255.255.0.0

!

interface Ethernet0/2

nameif dmz

security-level 80

ip address 172.168.1.1 255.255.255.0

!

interface Ethernet0/3

shutdown

no nameif

no security-level

no ip address

!

interface Management0/0

nameif management

security-level 100

ip address 192.168.1.1 255.255.255.0

management-only

!

boot system disk0:/asa842-k8.bin

ftp mode passive

dns server-group DefaultDNS

domain-name xxxxx

object network inside-network

subnet 10.1.0.0 255.255.0.0

access-list inside_access_in extended permit ip any any

pager lines 24

logging asdm informational

mtu outside 1500

mtu inside 1500

mtu dmz 1500

mtu management 1500

icmp unreachable rate-limit 1 burst-size 1

asdm image disk0:/asdm-645-205.bin

no asdm history enable

arp timeout 14400

!

object network inside-network

nat (inside,outside) dynamic interface

access-group inside_access_in in interface inside

route outside 0.0.0.0 0.0.0.0 69.x.x.81 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

timeout floating-conn 0:00:00

dynamic-access-policy-record DfltAccessPolicy

user-identity default-domain LOCAL

http server enable

http 192.168.1.0 255.255.255.0 management

no snmp-server location

no snmp-server contact

crypto ca trustpoint _SmartCallHome_ServerCA

crl configure

crypto ca certificate chain _SmartCallHome_ServerCA

certificate ca 6ecc7aa5a7032009b8cebcf4e952d491

quit

telnet timeout 5

ssh timeout 5

console timeout 0

dhcpd address 192.168.1.2-192.168.1.254 management

!

threat-detection basic-threat

threat-detection statistics access-list

no threat-detection statistics tcp-intercept

webvpn

!

class-map inspection_default

match default-inspection-traffic

!

policy-map global_policy

class inspection_default

inspect ftp

inspect h323 h225

inspect h323 ras

inspect rsh

inspect rtsp

inspect esmtp

inspect sqlnet

inspect skinny

inspect sunrpc

inspect xdmcp

inspect sip

inspect netbios

inspect tftp

inspect ip-options

!

service-policy global_policy global

prompt hostname context

no call-home reporting anonymous

call-home

profile CiscoTAC-1

no active

destination address http

https://tools.cisco.com/its/service/oddce/services/DDCEService

destination address email

callhome@cisco.com

destination transport-method http

subscribe-to-alert-group diagnostic

subscribe-to-alert-group environment

subscribe-to-alert-group inventory periodic monthly

subscribe-to-alert-group configuration periodic monthly

subscribe-to-alert-group telemetry periodic daily

Cryptochecksum:xxxxx

: end

[OK] write term
: Saved
:
ASA Version 8.4(2)
!
hostname xxxxx
domain-name xxxxx
enable password xxxxx encrypted
passwd xxxxx encrypted
names
dns-guard
!
interface Ethernet0/0
nameif outside
security-level 0
ip address 69.x.x.82 255.255.255.240
!
interface Ethernet0/1
nameif inside
security-level 0
ip address 10.1.0.2 255.255.0.0
!
interface Ethernet0/2
nameif dmz
security-level 80
ip address 172.168.1.1 255.255.255.0
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
!
boot system disk0:/asa842-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name xxxxx
object network inside-network
subnet 10.1.0.0 255.255.0.0
access-list inside_access_in extended permit ip any any
pager lines 24
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu dmz 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645-205.bin
no asdm history enable
arp timeout 14400
!
object network inside-network
nat (inside,outside) dynamic interface
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 69.x.x.81 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
quit
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:xxxxx
: end
[OK]

varrao · ‎10-20-2011

Hi Lon,

Why do you have the inside interface on security-level 0?? It should be 100, otherwisde you need to add this command:

same-security-traffic permit inter-interface

Let me know how it goes.

Thanks,

Varun

Thanks,
Varun Rao

View solution in original post

varrao · ‎10-20-2011

Hi Lon,

Why do you have the inside interface on security-level 0?? It should be 100, otherwisde you need to add this command:

same-security-traffic permit inter-interface

Let me know how it goes.

Thanks,

Varun

Thanks,
Varun Rao

Lon · ‎10-20-2011

Thank you very much, I cannot believe I overlooked that being '0'. I changed it and it works well now. I really appreciate your assistance and value any advice anyone has to offer.

varrao · ‎10-20-2011

Hi Lon,

Glad I could help

Varun

Thanks,
Varun Rao