05-17-2013 01:25 AM - edited 03-11-2019 06:45 PM
Hello Everybody.
I tried to start my ASA 5510 for first time, and the issue is that it is directly running in ROMMON mode.
So I want to know why is it starting in this mode? what could likely be the problem?
Also i resquest anybody who has a solution to help me solving this issue.
Please it is very urgent.
Thank you all for precious help!
P.S: Below is the startup config of my firewall
rommon #1> show info
Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008
Platform Identification and Boot Information:
Controller Type: 0x04d7
Platform Name: ASA5510
Configuration Register: 0x00002102
Interface Device Information:
Ethernet0/0: i82546GB, PCI: bus-3, slot-3, fct-1, rev-3, irq-9
Ethernet0/1: i82546GB, PCI: bus-3, slot-3, fct-0, rev-3, irq-9
Ethernet0/2: i82546GB, PCI: bus-3, slot-2, fct-1, rev-3, irq-9
Ethernet0/3: i82546GB, PCI: bus-3, slot-2, fct-0, rev-3, irq-9
Management0/0: i82551ER, PCI: bus-4, slot-2, fct-0, rev-16, irq-11
ROMMON Variable Settings:
ADDRESS=0.0.0.0
SERVER=0.0.0.0
GATEWAY=0.0.0.0
PORT=Management0/0
VLAN=untagged
IMAGE=
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20
rommon #5> show idprom
IDPROM PLATFORM Fields:
----------------------------------
IDPROM version: 4
Controller: 1239 (0x04d7)
H/W Version: 2.0
Product ID: ASA5510
Version ID: V04
Top Assy P/N: 68-2618-02
PCB P/N: 73-10043-01
PCB Revision: E0
PCB S/N: JAF1331AQTN
Chassis S/N: JMX1332L0PU
New Deviation: 0 (0x00000000)
Mfg Test Data: 00 00 00 00 00 00 00 00
RMA Number: 0-0-0-0
RMA History: 00
CLEI Code: COMMU00ARC
Description: ASA 5510 Adaptive Security Appliance
MAC Address: 0025.84fc.f434
MAC Block: 5
F/W Version: 1.0(11)5
IDPROM Boot Parameter Fields:
----------------------------------
Server IP Address: 0.0.0.0
Local IP Address: 0.0.0.0
Gateway IP Address: 0.0.0.0
Local Port: Management0/0
VLAN ID: untagged
Link UP Timeout: 20
Packet Timeout: 4
Retry Count: 20
Image File:
Config Register: 0x00002102
Config File:
IDPROM Power Supply Fields:
----------------------------------
IDPROM version: 4
Power Supply Part Number : 341-0094-03
Power Supply Rev Number : A0
Product ID (PID) : ASA-180W-PWR-AC
Version Identifier (VID) : V02
Power Supply Type : AC
CLEI Code Type : IPUPAC9AAA
New Deviation Number : 0 (0x00000000)
Power Supply Serial Number: DTN131780EK
UDI Description : ASA/IPS 180W AC Power Supply
05-17-2013 04:25 AM
Hi,
To my understanding the ASA should only go to ROMMON if you choose it while the device is booting OR if there is no software image on the Flash memory of the ASA OR if the image file on the Flash memory is somehow corrupted.
Could you perhaps copy/paste the whole output when the ASA is booting up?
- Jouni
05-17-2013 12:33 PM
Thank you Sir.
I finally found out the issue.
It was due to lack of IOS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide