05-24-2020 11:28 PM
Hi all,
We have a server which requires to go out on a specific interface "outside3". I tried to set it up so it will route to outside3 but somehome the traffic still go out at outside2.
This is what I configure for that change:
access-list outside3_access_in extended permit object-group DM_INLINE_PROTOCOL_1 host xxx.xyz.000.abc host 192.168.12.233
access-list Route_to_ASP extended permit object-group DM_INLINE_PROTOCOL_2 host 192.168.12.233 host xxx.xyz.000.abc
object network Subnet_12_ASP
nat (inside1,outside3) dynamic interface
access-group outside3_access_in in interface outside3
route-map Route_to_ASP_PBR permit 20
match ip address Route_to_ASP
set ip next-hop 10.15.0.2
route outside3 0.0.0.0 0.0.0.0 10.15.0.2 120
http 10.15.0.0 255.255.255.248 outside3
Hope you could help me out. Thank you.
Chuong
05-25-2020 12:49 AM
05-26-2020 03:07 PM
I have 2 others outside interfaces but I don't see any policy map apply to those interface in the config file. There is only one policy-map command which is policy-map global_policy.
How do I do that? Sorry, I'm really novice with ASA. Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide