ASA 5520 ASA-SSM-10 get license

[teymur azimov]

Hi dears

i have ASA 5520 and asa-ssm-10 modula.

at my asa-ssm-10 modula.

Host:

    Realm Keys          key1.0

Signature Definition:

    Signature Update    S399.0                   2009-05-06

    Virus Update        V1.4                     2007-03-02

OS Version:             2.4.30-IDS-smp-bigphys

Platform:               ASA-SSM-10

Serial Number:          JAF1338BCGD

No license present

Sensor up-time is 2 days.

as you see i have no license and sensor up-time is 2 days.

now i need a license.

i know that license is needed when i upgrading signature update. am i rigth?

where i get my license?or how i get?

i have Cisco ASA 5500 Series Content Security Edition and i know that that include:

Includes Content Security and Control Security Services Module 10 (CSC-SSM-10), 50-user antivirus/anti-spyware license with 1-year subscription service*, firewall services, 250 IPsec VPN peers, 2 SSL VPN peers, and 3 Fast Ethernet interfaces

please help me

[Jennifer Halim]

What you have seems to be an AIP module (ie: IPS module) instead of CSC (Content Security) module.

If you already have IPS subscription license, then you can IDM to the module by configuring the IP Address of the module and also connect the port on the module to your network so you can manage it via HTTPS/GUI. Then browse to the licensing section and update the license, it will connect to cisco database to retrieve the license key if you already purchase the IPS subscription.

[teymur azimov]

Ok I aggree with you and do as you say.

how i upgrade my signature ??

if you have document or link or if you know how i upgrade signature please write me

thanks to help me.

[Jennifer Halim]

There are a few steps that need to be performed prior to upgrading the signature, I am not too sure where you are at but here they are:

1) Setup the AIP module with IP Address and connect the port to the network so you can manage it via GUI:

http://www.cisco.com/en/US/docs/security/ips/7.0/installation/guide/hw_initializing.html

2) How to access the IDM via HTTPS once the above has been setup:

http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/idm/idm_getting_started.html#wp1032993

3) Then update the license:

http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/idm/idm_getting_started.html#wp1051444

4) Then update the signature:

http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/idm/idm_sensor_management.html#wp2016040

Hope this helps.