10-17-2011 02:02 PM - edited 03-11-2019 02:38 PM
I have a asa 5520 with an outside and backup interface. I am trying to configure two static nat statements from the inside to the outside and
backup interface.
Here is what I have configured so far.
object network obj-10.1.1.254
host 10.1.1.254
object network obj-10.1.1.254
nat (inside,outside) static 172.25.10.3
I want to also use nat (inside,backup) static 172.25.10.3
10-17-2011 05:35 PM
Hello,
Then you will need to create another Nat statement.
object network obj-172.25.10.3
host 172.25.10.3
Nat (inside,backup) source static obj-10.1.1.254 obj-172.25.10.3
I would do it like that, let me know if these is the answer you are looking for.
Regards,
Julio
10-19-2011 01:56 PM
10-19-2011 02:18 PM
Hello,
I am sorry, I dont know what I was thinking when I wrote that down lol.
Now the thing is as you are using a different ISP you will have a different public IP address.
So you will need to do it based on that new Public Ip. lets say is 20.3.2.1
So the solution would look like
object network obj- 20.3.2.1
host 20.3.2.1
Nat (inside,backup) source static obj-10.1.1.254 obj- 20.3.2.1
Regards,
Julio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide