09-13-2013 05:07 AM - edited 03-11-2019 07:38 PM
Hi All,
I am in the process of setting up a Test and Dev network that must support and separate multiple projects. I have to build a WAN infrastructure that supports these scenarios. The plan is to user VRFs to create separate route domains for separation. I have an ASA 5510 running 9.1.2 that is planned to support inter-network routing between projects, if necessary. It also is separating Test/Dev from Office network. Finally, it is to provide remote access to various guests to access their respective project only.
I would like to get your thoughts on the best design of the ASA to support such a scenario. My initial thoughts are to etherchannel the 2 Gigabit interfaces and build subinterface to support each VRF. Is this viable or would you suggest a different configuration.
Thank you
09-15-2013 06:40 PM
Hello Forrest,
I think the VRF solution will fit your needs while the ASA with the port-channel will provide redundancy plus security.
You could also run the ASA on multiple-context to split the domain across all of the devices.
For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com
Any question contact me at jcarvaja@laguiadelnetworking.com
Cheers,
Julio Carvajal Segura
09-19-2013 09:13 PM
Thank you for the feedback. I have not had the opportunity to work with multi-context before and will research.
Sent from Cisco Technical Support iPad App
09-16-2013 03:59 AM
HI Forrest,
You can find related info on the link mentioned below:
https://docs.google.com/document/d/12dyycF9ZGhqOJcfQZydN3d7cPCSXxzS6uWSctbFOu7s/edit
Regards,
Anim Saxena
Community Manager
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: