09-13-2013 05:07 AM - edited 03-11-2019 07:38 PM
Hi All,
I am in the process of setting up a Test and Dev network that must support and separate multiple projects. I have to build a WAN infrastructure that supports these scenarios. The plan is to user VRFs to create separate route domains for separation. I have an ASA 5510 running 9.1.2 that is planned to support inter-network routing between projects, if necessary. It also is separating Test/Dev from Office network. Finally, it is to provide remote access to various guests to access their respective project only.
I would like to get your thoughts on the best design of the ASA to support such a scenario. My initial thoughts are to etherchannel the 2 Gigabit interfaces and build subinterface to support each VRF. Is this viable or would you suggest a different configuration.
Thank you
09-15-2013 06:40 PM
Hello Forrest,
I think the VRF solution will fit your needs while the ASA with the port-channel will provide redundancy plus security.
You could also run the ASA on multiple-context to split the domain across all of the devices.
For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com
Any question contact me at jcarvaja@laguiadelnetworking.com
Cheers,
Julio Carvajal Segura
09-19-2013 09:13 PM
Thank you for the feedback. I have not had the opportunity to work with multi-context before and will research.
Sent from Cisco Technical Support iPad App
09-16-2013 03:59 AM
HI Forrest,
You can find related info on the link mentioned below:
https://docs.google.com/document/d/12dyycF9ZGhqOJcfQZydN3d7cPCSXxzS6uWSctbFOu7s/edit
Regards,
Anim Saxena
Community Manager
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide