01-19-2014 11:23 PM - edited 03-11-2019 08:32 PM
After upgrading from 8.4 to 9.1.2 connection numbers are growing and we guess udp connections cannot finalize as usual.
Normal udp timeouts are 2 mins but we have idle udp connections for 10 hours??
Any known bug id or solution?
01-19-2014 11:42 PM
Hi,
The Cisco site doesnt seem to list anything specific to your situation
This is the only I found so far
https://tools.cisco.com/bugsearch/bug/CSCuh13899
Are your "timeout" at default for the UDP connections (2min)?
Is there any Policy Map configurations that might affect the timeouts?
Does the idle connection list a non default timeout value when you use the command
show conn long protocol udp
- Jouni
01-19-2014 11:47 PM
Yes 2 min
No policy maps
for below command ,yes lots of
show conn long protocol udp
we normally 500k conns during workhours but after upgrading yesterday this morning now we have 800k conns.
this one exactly the same,we are going to open TAC,i will reply this discussion if we get anything from TAC.
09-19-2014 05:30 AM
Hi,
Did you find out what was the problem?
Thanks !!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide