02-04-2013 08:48 AM - edited 03-11-2019 05:56 PM
i has ASA 5520 that has no any OS images in it's flash disks, and i want to boot it first from the tftp then copy this image to flash disks ( if the tftp boot suc ) and i did the below config :
----------------------------------------------------------------------------------------
ADDRESS=192.168.1.1
SERVER=192.168.1.2
GATEWAY=192.168.1.2
PORT=Management0/0
IMAGE=asa804-k8.bin
----------------------------------------------------------------------------------------
after that its also go to boot from rommon, then i tried to change the boot confreg value to -----> rommon #0>confreg 0x00112002
after that boot it do the below
----------------------------------------
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008
Platform ASA5520
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Launching BootLoader...
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
Failsafe booting engaged.
Default configuration file contains 1 entry.
Searching / for images to boot.
No images in /
Error 15: File not found
unable to boot an image
ÿ
Booting system, please wait...
CISCO SYSTEMS
Embedded BIOS Version 1.0(11)5 08/28/08 15:11:51.82
Low Memory: 631 KB
High Memory: 2048 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 2578 Host Bridge
00 01 00 8086 2579 PCI-to-PCI Bridge
00 03 00 8086 257B PCI-to-PCI Bridge
00 1C 00 8086 25AE PCI-to-PCI Bridge
00 1D 00 8086 25A9 Serial Bus 11
00 1D 01 8086 25AA Serial Bus 10
00 1D 04 8086 25AB System
00 1D 05 8086 25AC IRQ Controller
00 1D 07 8086 25AD Serial Bus 9
00 1E 00 8086 244E PCI-to-PCI Bridge
00 1F 00 8086 25A1 ISA Bridge
00 1F 02 8086 25A3 IDE Controller 11
00 1F 03 8086 25A4 Serial Bus 5
00 1F 05 8086 25A6 Audio 5
02 01 00 8086 1075 Ethernet 11
03 01 00 177D 0003 Encrypt/Decrypt 9
03 02 00 8086 1079 Ethernet 9
03 02 01 8086 1079 Ethernet 9
03 03 00 8086 1079 Ethernet 9
03 03 01 8086 1079 Ethernet 9
04 02 00 8086 1209 Ethernet 11
04 03 00 8086 1209 Ethernet 5
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008
Platform ASA5520
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
----------------------------------------------------------------------------------
and i tried many boot values but still have this problem,
please help me in that, i need to boot up my ASA device and copy this image to flash disk
02-05-2013 12:28 AM
Are you able to boot the ASA using the image from TFTP at all? If yes, have you formatted the flash then put the image on it?
02-05-2013 10:43 PM
Thanks for ur reply,
No, i can't boot from TFTP(i need to do that then copy this image to my flash disks).
about flash ------> i get this asa with 2 flash disks have no files( one internal and another external).
so please if have any idea about the problem is, or how to make it boot from tftp and about configuration regester from rommon.
thanks.
02-06-2013 12:42 AM
why can't you boot the image from tftp? can you provide the error message? try confreg 0x4. you will need to boot the asa first, then try formatting the flash card, save the running activation key first after you are able to boot from tftp.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide