Hi gentlemen,
I recibe like two weeks ago a New ASA 5585 from Cisco, but the device at the fisrt day I started use threw to much CLI errors and dont stop, always is threw errors, I reported with Cisco and they are making probbes, but I want to post to get more sopport or maybe someone from here has or had the same error.
Device Condition:
The ASA 5585 it is only conected to the power and I connected directly to the CLI with a console cable, the device have the default configuration.
CLI Errors:
ENVMON: adm1066_volt_read: i2c device 0x26 reg 0xaf read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x26
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x26, address = 160 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ENVMON: adm1066_volt_read: i2c device 0x26 reg 0xa0 read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x26
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x26, address = 161 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ciscoasa#
ciscoasa#
ciscoasa#
ciscoasa# sh inve
Name: "module 0", DESCR: "ASA 5585-X Security Services Processor-10 with 8GE"
PID: xxxxxxxxxxxxx , VID: xxx , SN: xxxxxxxxxxx
Name: "Chassis", DESCR: "ASA 5585-X"
PID: xxxxxxxxxxxxx , VID: xxx , SN: xxxxxxxxxxxxxx
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x19
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x19, address = 1 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ENVMON: ps_fail_read: i2c device 0x19 reg 0x1 read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x19
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x19, address = 1 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ENVMON: ps_fail_read: i2c device 0x19 reg 0x1 read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x19
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x19, address = 1 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
Driver Error, invalid sensor query
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x19
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x19, address = 1 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ENVMON: ps_fail_read: i2c device 0x19 reg 0x1 read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x19
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x19, address = 1 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ENVMON: ps_fail_read: i2c device 0x19 reg 0x1 read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x19
i2c_read_byte_w_suspend() error, slot =
ENVMON: adm1066_volt_lock_read: i2c device 0x26 reg 0x82 read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x26
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x26, address = 130 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ENVMON: adm1066_volt_lock_read: i2c device 0x26 reg 0x82 write error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x26
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x26, address = 170 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ENVMON: adm1066_volt_read: i2c device 0x26 reg 0xaa read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x26
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x26, address = 171 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ENVMON: adm1066_volt_read: i2c device 0x26 reg 0xab read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x26
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x26, address = 172 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ENVMON: adm1066_volt_read: i2c device 0x26 reg 0xac read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x26
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x26, address = 173 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ENVMON: adm1066_volt_read: i2c device 0x26 reg 0xad read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x26
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x26, address = 174 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
ENVMON: adm1066_volt_read: i2c device 0x26 reg 0xae read error
i2c error in fn: i2c_configure_l2_switch, caller: 0x01d5ab92, error: 0xb, i2c_device: 0x26
i2c_read_byte_w_suspend() error, slot = 0x0, device = 0x26, address = 175 byte count = 1. Reason: I2C_UNPOPULATED_ERROR
