ASA firewall

[philbert_manalo]

hi,

i configured Cisco ASA 5508-x connected to switch, when i tap into native vlan using Rj45, i got an ip address of 192.168.0.x which is good and also i can browse the internet. but when i tap into VLAN 2 or the other VLAN's, i can get an ip address but cannot go to internet?  i already configured sub-interface on the ASA.

thank you!

Philbert 

[Akshay Rastogi · Accepted solution]

Hi Philbert,

Please check if the port on switch is trunk with allowed vlan 2 in that trunk. Also nat statement is configured for host behind sub-interface (something like nat (<sub-interface-nameif>,outside) dynamic interface.

Regards,

Akshay Rastogi

[philbert_manalo]

hi Akshay,

thanks for you help, i can now get my vlans to internet..im on a testing because it is slow? by the way thanks for the help..

Cheers!

Philbert