07-18-2013 02:35 AM - edited 03-11-2019 07:13 PM
hello all,
we have this current network setup:
our ASA firewall only passes one subnet.. supposedly 2 subnet must pass to the ASA firewall.. any suggestions?
thannks a lot.
07-18-2013 02:39 AM
Hi,
Can you clarify the situation a bit.
Do you mean that one internal subnet is able to connect through the ASA to the Internet or what do you mean?
Naturally if this is the case then the most common places to look are NAT, Routing and ACLs
- Jouni
07-18-2013 02:51 AM
hi Mr.JouniForss..
as you can see in my ASA Firewall..it has two connection, it has One subnet each going to the servers.. now the ASA Firewall wont allow 2 subnet to enter.. only 1 subnet will pass.. which makes the other server passive.. my goal here is to make the server all active,
thanks
07-18-2013 02:55 AM
Hi,
As I said you are most likely missing some NAT or ACL related configuration.
Also your above statement doesnt really clarify what you have attempted to do to troubleshoot this so far.
Without seeing any configurations I can only suggest what things to look for in the ASA configurations.
- Jouni
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide