Hi All
I am hoping someone is able to help on the following, I would expect the banner to be presented when the user first connects as per the Cisco link below:
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/access_management.html
ASA-1(config)# sh run banner
banner motd ** W A R N I N G **
banner motd You have logged in to a secure device. If you are not authorized to access
when I have a Banner MOTD configured with AAA I get the following:
ASA-1# logout
Logoff
Username: cisco
Password: *****
** W A R N I N G **
You have logged in to a secure device. If you are not authorized to access
YOUR LOGGING ONTO A ASA
Type help or '?' for a list of available commands.
ASA-1>
The message is given after the user logs in.
Now when AAA is disabled the following happens:
ASA-1(config)# no aaa authentication serial console LOCAL
ASA-1(config)# exit
ASA-1# logout
Logoff
** W A R N I N G **
You have logged in to a secure device. If you are not authorized to access
Type help or '?' for a list of available commands.
ASA-1>
Am I reading the documentation incorrect as I thought this should be given if someone connected to the console? as this is what I am after.
Regards Craig