11-24-2008 04:20 AM - edited 03-11-2019 07:17 AM
I have had the following problem before but I cant remember what I did. Could anyone help.
My vlan1 inside interface is set to administratively down. and when I ping its says inside interface is shutdown.
I have tried issueing the no shutdown command but it does nothing, and the interface is still set to shutdown.
I seem to remember it being this version of the asa software where you have to issue a command other than no shutdown. (7.2(4))
Many thanks,
Daniel.
Solved! Go to Solution.
11-24-2008 07:04 AM
Sounds like your using sub interfaces.
Make sure your physical interface is not shutdown. If it is down your sub interfaces won't work until the physical is up. Issue no shut under real interface.
HTH
Chad
11-24-2008 07:04 AM
Sounds like your using sub interfaces.
Make sure your physical interface is not shutdown. If it is down your sub interfaces won't work until the physical is up. Issue no shut under real interface.
HTH
Chad
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide