cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2272
Views
0
Helpful
2
Replies

asa snmp

susim
Level 3
Level 3

Hi,

I have the following  configuration ,

but it does not working ,

logging enable
no snmp-server location
no snmp-server contact


snmp-server host INSIDE 192.168.2.1 trap community passwordd
snmp-server enable traps syslog
logging history notifications

please help

Thank you 

2 Replies 2

md.irfan.khans
Level 1
Level 1

Did you let us know the Debug output for snmp , 

Run this command . 

"debug snmp event"

"debug snmp error"

"debug snmp packet"

You can see the snmp packet where its getting failed and why

Hi,

there is no command as you suggested 


conf t

debug snmp ?
*** No matching command found in current mode, matching in (exec) mode ***
all Enable all debug outputs
errors Enable error outputs
mts Enable dump of MTS Packets and Headers
notif-errors Enable Notif thread debug error outputs
notif-trace Enable Notif thread debug trace outputs
pkt-dump Enable pkt dump debug outputs
req-latency-time Enable logging of time taken by mib object processing
trace Enable trace-level debug outputs

Thanks

Review Cisco Networking products for a $25 gift card