ASA - VPN Up but can't ping between LNA

[yaia987]

Hello everyone, I hope you're all doing well !

I'm here because I really need your help.. I need to create VPN between 2 routers ASA 5505:

--> I've configured LAN IPs and Public IP on both routers.

--> I've configured VPN IPSec Lan to Lan on both routers.

--> VPN is UP and working fine.

But... when I'm on LAN 192.168.1.0, trying a ping to the network 172.33.33.0, it doesn't work.

Same happens from 172.33.33.0 to 192.168.1.0

Can you help me please, I think the problem is with NAT and/or ACLs configuration, but I can't find out.

You can find the network schema and the configuration files in the attachments.

Thank you in advance and have a nice day !

Regards,

Vetea

[Flavio Miranda]

Hi @yaia987

Looking at one of firewall I saw you used net instead nat. This may not be the problem but you should correct it. Look at both firewall.

 Also, you created an Access-list but I didn't see you applying it, looks like you created but did not put in any interface.

 Please, correct it and test, then, let me know if you need further assistance.

-If I helped you somehow, please, rate it as useful.-