02-10-2012 10:07 AM - edited 03-11-2019 03:27 PM
Hi all
I have an asa 5585x cluster.
I get ssh access but no console access on the standby unit.
On the active unit, when I try console access, ASA ask for a password.
I have tried all the one that I have configured, but without success.
Any idea ?
02-10-2012 11:38 AM
It might be good to start investigating this by posting the part of the configuration that deals with aaa authentication. If we see this we may get some idea of what is causing the issue.
HTH
Rick
02-10-2012 07:17 PM
I'm with Rick on this one.
Please provide output from "show run | i console". We would be looking for (among other things) a line something like "aaa authentication serial console"....
02-13-2012 03:11 AM
Hi all
I didn't refer thar i'm on a multy context environment. Heare is the concole config
FW03/act/admin# sh run | i console
aaa authentication enable console TACACS+F1 LOCAL
aaa authentication http console TACACS+F1 LOCAL
aaa authentication ssh console TACACS+F1 LOCAL
aaa authentication serial console TACACS+F1 LOCAL
aaa accounting enable console TACACS+F1
aaa accounting ssh console TACACS+F1
FW03/act/admin#
FW03/act/admin# ch c system
FW03/act# sh run | i console
console timeout 10
FW03/act#
Thanks for the support
02-16-2012 09:23 AM
Hi All
Reboot on both nodes, and problem solved.
Thanks for the support.
02-16-2012 09:47 AM
Thanks for posting back to the thread to tell us that a reboot fixed the problem. It is good to know that it is working now. It would be nice to know what the original problem was.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide