cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1341
Views
0
Helpful
2
Replies

ASA5508-X

Docklands
Level 3
Level 3

We have two ASA5508-X firewalls configured for HA main/standby running 9.7

If we connect a Windows (V7 or 10) PC either directly or via a layer 2 switch to the outside ports of the ASA, the static IP address configured on the PC is overwritten with a 169.254.x.x address. DHCP has been disabled on the ASA. If the PC is connected to a switch it retains its static IP address.

 

Has anyone experienced this before? Is this a Windows issue or the ASA?

 

Thanks

Mike

1 Accepted Solution

Accepted Solutions

Thanks Karsten. I’ll give it a try on Monday and let you know

View solution in original post

2 Replies 2

I would say that this is a windows problem (with DAD), but you can mitigate it on the ASA by disabling proxy-arp:

sysopt noproxyarp outside
--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

Thanks Karsten. I’ll give it a try on Monday and let you know
Review Cisco Networking for a $25 gift card