Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know if the 3560 complies with the following requirements?
IP Transmission Delay (IPTD) no greater than 50ms.IP Delay Variation (IPDV) no greater than 25ms.IP Loss Ratio (IPLR) no greater than 1x10-3.IP Error Loss (IPER) no greater than...
We have two ASA5508-X firewalls configured for HA main/standby running 9.7
If we connect a Windows (V7 or 10) PC either directly or via a layer 2 switch to the outside ports of the ASA, the static IP address configured on the PC is overwritten with a...
We have inherited a network that is based upon two core 4507R's that are using an IOS that is approximately 5 years old - believed to be 15.1.
From a security perspective, is there any merit in upgrading the IOS?
Thanks
We have a few 2960-X switches that are connected to ISR's using HSRP. The ISR's are have multicasting enabled and PIM Dense-mode on the sub-interfaces that connect to the switches. The switches have IGMP Snooping running by default. If we run VLC on ...
