Hi All,
I hope this is the correct location for this.
Anyway, here's the situation I'm trying to configure several VLANs on my ASA to uniquely allocate to contexts, the VLANs will be trunked from my VSS.
Unfortunately I'm not clear on how to achieve this, the configuration guide for 8.4 talks about multiple contexts and routed setups all which don't appear to apply exactly. I've configured the port channel at both ends and I've configured sub-interfaces on the port channel and assigned VLAN IDs. These sub-interfaces are then allocated to the contexts to set 'ip address' etc. I've not been able to successfully test this configuration and I am concerned that it is incorrect..
If anyone has any advice or suggestions I would be grateful?
Many thanks.