ASA5585-SSP-SFR60 Access list Failed

[gilsang kim]

I'm operating a ASA5585-SSP-SFR60.

The default policy was deleted, and the administrator IP was added.

After changing the settings, the ASA5585-SSP-SFR60 does not have access.(https)

[ASA5585-SSP-SFR60 Default Rule]

host any port 443, 22

Add Rules and Delete

administrator IP 192.168.10.0 and port 443, 22   - Add

Default (any) policy   - delete

Please let me know if there is any way to connect. And let me know how to repair it.

[Marvin Rhoads]

Do you mean you can no longer access your Firepower Management Center or the ASA FirePOWER module?

I ask because the module does not have a web server or an https listener.

You should still be able to access the FMC via console but changing the administrative access list is not something that can be done directly by an end customer from the console cli. If you open a TAC case, they should be able to help you recover.

[gilsang kim]

firepower management(https) is not access(https) is not access.

Can I access the Firepower Management Recovery Console?

[Marvin Rhoads]

I meant the console of the FMC host.

If it is a physical appliance then use a keyboard and monitor plugged into it.

If it is a VM then access the console via VCenter.

Either way, you will need TAC assistance.