cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

284
Views
0
Helpful
3
Replies

asdm-623f.bin

Hi asa fwsm

trying to use asdm but this is the erro i am getting. fwsm is in multi context mode 

The requested URL /admin/public/index.html was not found on this server.

multi context mode

    sh disk: | i asdm-623f.bin
338 13740644   Nov 07 2014 15:20:02 asdm-623f.bin

outside is the admin context mgmt vrf

aaa authentication http console AuthtoPix
aaa authentication secure-http-client
http server enable
http 192.168.2.200 255.255.255.255 outside
http 192.168.11.11 255.255.255.255 outside

ssl  encryption rc4-md5 des-sha1 3des-sha1

licence

VPN-DES                     : Enabled
VPN-3DES-AES                : Enabled

 

 

 

014-11-18T10:10:01.628752+00:00 10.10.11.170 : Nov 18 10:10:00 UTC: %FWSM-session-7-710002: tcp access permitted from 192.168.2.200/35835 to outside:10.10.11.170/https
2014-11-18T10:10:01.628920+00:00 10.10.11.170 : Nov 18 10:10:00 UTC: %FWSM-session-6-302013: Built inbound TCP connection 0 for outside:192.168.2.200/35835 (192.168.2.200/35835) to outside:10.10.11.170/443 (10.10.11.170/443)
2014-11-18T10:10:01.629239+00:00 10.10.11.170 : Nov 18 10:10:00 UTC: %FWSM-session-6-302013: Built inbound TCP connection 0 for outside:192.168.2.200/35836 (192.168.2.200/35836) to outside:10.10.11.170/443 (10.10.11.170/443)
2014-11-18T10:10:01.635590+00:00 10.10.11.170 : Nov 18 10:10:00 UTC: %FWSM-session-6-302013: Built inbound TCP connection 0 for outside:192.168.2.200/35837 (192.168.2.200/35837) to outside:10.10.11.170/443 (10.10.11.170/443)
2014-11-18T10:10:01.645442+00:00 10.10.11.170 : Nov 18 10:10:00 UTC: %FWSM-session-6-302013: Built inbound TCP connection 0 for outside:192.168.2.200/35838 (192.168.2.200/35838) to outside:10.10.11.170/443 (10.10.11.170/443)
2014-11-18T10:10:01.665530+00:00 10.10.11.170 : Nov 18 10:10:01 UTC: %FWSM-session-6-302014: Teardown TCP connection 0 for outside:192.168.2.200/35835 to outside:10.10.11.170/443 duration 0:00:00 bytes 1032 TCP FINs
2014-11-18T10:10:01.687443+00:00 10.10.11.170 : Nov 18 10:10:01 UTC: %FWSM-session-6-302014: Teardown TCP connection 0 for outside:192.168.2.200/35836 to outside:10.10.11.170/443 duration 0:00:00 bytes 1032 TCP FINs
2014-11-18T10:10:01.848054+00:00 10.10.11.170 : Nov 18 10:10:01 UTC: %FWSM-sys-6-605005: Login permitted from 192.168.2.200/35838 to outside:10.10.11.170/https for user "xxxxx"
2014-11-18T10:10:02.382761+00:00 10.10.11.170 : Nov 18 10:10:01 UTC: %FWSM-session-6-302014: Teardown TCP connection 0 for outside:192.168.2.200/35837 to outside:10.10.11.170/443 duration 0:00:00 bytes 1032 TCP FINs
2014-11-18T10:10:02.431796+00:00 10.10.11.170 : Nov 18 10:10:01 UTC: %FWSM-session-6-302014: Teardown TCP connection 0 for outside:192.168.2.200/35838 to outside:10.10.11.170/443 duration 0:00:00 bytes 2250 TCP FINs
2014-11-18T10:10:02.568152+00:00 10.10.11.170 : Nov 18 10:10:01 UTC: %FWSM-session-6-106015: Deny TCP (no connection) from 192.168.2.200/35838 to 10.10.11.170/443 flags ACK  on interface shared vlan 206

 

 

Please suggest

thank you

3 REPLIES 3
Marvin Rhoads
VIP Community Legend

Is the ASDM bin file referenced in the system context?

Hi Marvin,

the fwsm is multicontext mode

and under system context  iam unable to use the command "asdm image ....."

FWSM-TCT(config)# asdm ?

configure mode commands/options:
  history  Enable/Disable Device Manager data sampling
FWSM-TCT(config)# asdm

FWSM-TCT# dir

Directory of disk:/

338    -rw-  13740644    15:20:02 Nov 07 2014  asdm-623f.bin

 

 

 

Thank you for the response

Hi,

I am not sure if you are in the System context when you took this output.

Can you post the complete log output and also show version from the FSWM ?

Thanks and Regards,

Vibhor Amrodia