09-19-2017 12:23 PM - edited 02-21-2020 06:20 AM
Dears,
I moved my ASA from local to AAA i m doing only authentication and no authorization and accounting, my SSH connection through AAA works fine but asdm access through AAA fails.
Anybody can help me where i missing things i have cahnged the AAA commands in the running confguration
09-19-2017 01:27 PM
Hello,
Do you have an ASDM image loaded on dosk0: ?
Basic step to setup ASDM is:
asdm image dosk0:/asdmXXX.bin (if image name is asdmXXX.bin)
http server enable
http X.X.X.X X.X.X.X inside (Source Network)
09-20-2017 12:22 PM
yes i have
ASDM works perfect without aaa, when i enabled aaa for https i am not able to login, when i changed to local it works perfect , also it works perfect in ssh
thanks
09-20-2017 01:13 PM
Alright. Which aaa server do you have? did you added the Firewall as a client on it?
Both have the same Shared Secret?
The ASA supports the following RFC-compliant RADIUS servers for AAA:
• Cisco Secure ACS 3.2, 4.0, 4.1, 4.2, and 5.x
• Cisco Identity Services Engine (ISE)
• RSA RADIUS in RSA Authentication Manager 5.2, 6.1, and 7.x
• Microsoft
09-21-2017 01:30 PM
Dear
yes firewall is been added as a client and as I mentioned ssh authentication r working with aaa this means both have same secret key.
i have ise 2.0.
thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: