Bad magic number (0xf45ea3e)

[Dhikra Marghli]

Hello

I  have ASA 5512X ,  so i have a problem :

rommon #6> tftpdnld
ROMMON Variable Settings:
ADDRESS=192.168.1.1
SERVER=192.168.1.254
GATEWAY=192.168.1.254
PORT=Management0/0
VLAN=untagged
IMAGE=ftd-boot-9.8.2.3.lfbff
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20

tftp ftd-boot-9.8.2.3.lfbff@192.168.1.254 via 192.168.1.254
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Received 104813248 bytes

Bad magic number (0xf45ea3e)
rommon #7>

so please  How i can resolve   the  problem   with this command   file ftd-boot-9.8.2.3.lfbff  to allow me  pass the next  step !!

i wait a reply from expert security  ASA  cisco and help

thanks in adv

[Dhikra Marghli]

rommon #0> show info

Cisco Systems ROMMON Version (2.1(9)8) #1: Wed Oct 26 17:14:40 PDT 2011
Platform Identification and Boot Information:
Controller Type: 0x0709
Platform Name: ASA 5512-X with SW, 6 GE Data, 1 GE Mgmt, AC
Configuration Register: 0x00000001

Interface Device Information:
Management0/0: i82574L, PCI: bus-12, slot-0, fct-0, rev-0, irq-11
GigabitEthernet0/0: i82574L, PCI: bus-5, slot-0, fct-0, rev-0, irq-10
GigabitEthernet0/1: i82574L, PCI: bus-9, slot-0, fct-0, rev-0, irq-10
GigabitEthernet0/2: i82574L, PCI: bus-4, slot-0, fct-0, rev-0, irq-5
GigabitEthernet0/3: i82574L, PCI: bus-8, slot-0, fct-0, rev-0, irq-5
GigabitEthernet0/4: i82574L, PCI: bus-3, slot-0, fct-0, rev-0, irq-10
GigabitEthernet0/5: i82574L, PCI: bus-7, slot-0, fct-0, rev-0, irq-10

ROMMON Variable Settings:
ADDRESS=192.168.1.1
SERVER=192.168.1.254
GATEWAY=192.168.1.254
PORT=Management0/0
VLAN=untagged
IMAGE=ftd-boot-9.8.2.3.lfbff
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20

//////////////////////////////////////////////////////////////

rommon #2> show idprom

IDPROM PLATFORM Fields:
----------------------------------
IDPROM version: 4
Controller: 1801 (0x0709)
Version ID: V05
H/W Version: 1.0
New Deviation: 0 (0x00000000)
PCB P/N: 74-8724-02
PCB Revision: A0
PCB S/N: FCH20277MUP
Chassis S/N: FTX2031126S
Mfg Test Data: 00 00 00 00 00 00 00 00
RMA Number: 0-0-0-0
RMA History: 00
CLEI Code: CMMM200ARD
MAC Address: 843d.c64c.e944
MAC Block: 10
F/W Version: 2.1(9)8
Electronic ID: M09103710
Product ID: ASA5512
Description: ASA 5512-X with SW, 6 GE Data, 1 GE Mgmt, AC

IDPROM Boot Parameter Fields:
----------------------------------
Config Register: 0x00000001
Server IP Address: 192.168.1.254
Local IP Address: 192.168.1.1
Gateway IP Address: 192.168.1.254
Local Port: Management0/0
VLAN ID: untagged
Link UP Timeout: 20
Packet Timeout: 4
Retry Count: 20
Image File: ftd-boot-9.8.2.3.lfbff
Config File:

[Marvin Rhoads · Accepted solution]

FTD boot images for an ASA 5512 should be named like "ftd-boot-9.9.2.0.cdisk"

See this location for the valid files:

https://software.cisco.com/download/home/286271170/type/286306337/release/6.2.3.

[Dhikra Marghli]

the problem is resolved  but i have alarm orange in ASA ...so please what's command can check this alarm  orange !!

i wait your reply and answer 

thanks in adv

[Marvin Rhoads · Accepted solution]

An amber (or orange) LED usually indicates a hardware problem.

Please confirm which LED is amber on your system, refer to this guide:

https://www.cisco.com/c/en/us/td/docs/security/asa/hw/maintenance/5500xguide/5500xhw/asa_overview.html#99128

[Dhikra Marghli]

Thanks to help me