Solved: basic PIX 525 configuration

Haouideche2015 · ‎05-05-2016

Hello Everybody,

What are the basic commands to configure PAT on a PIX 525 (I've only the global interface public IP address available for the PAT and a class C network for the inside)

Thanks in advance for your replies

NH

Karsten Iwen · ‎05-05-2016

You really want to connect a device to the internet that didn't get any security patches for at least seven years (assuming you are running the latest software)? Well, good luck ...

nat (inside) 1 YOUR-NETWORK 255.255.255.0
global (outside) 1 interface

--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

View solution in original post

Karsten Iwen · ‎05-05-2016

You really want to connect a device to the internet that didn't get any security patches for at least seven years (assuming you are running the latest software)? Well, good luck ...

nat (inside) 1 YOUR-NETWORK 255.255.255.0
global (outside) 1 interface

--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

Haouideche2015 · ‎05-07-2016

Thanks for your answer...