Network Security

I am looking to see if the Cisco ASA 5500 platform running ver 8.2 has support for RPC dynamic port filtering? So basically can I enable TCP 135 in an ACL and will the application policy read the RPC calls and dynamically open the ports being set in ...

I currenty have a pix and would like to import some of the commands over but I am having a hard time with converting this nat rule. How would this nat rule be implemented on an ASA.nat (inside) 1 0.0.0.0 0.0.0.0 0 0static (inside,outside) 10.199.0.0 ...

Has anyone noticed issues with icmp inspection not working on certain conversations,or can someone think of another explanation for this?%ASA-6-302020: Built outbound ICMP connection for faddr XX.XX.XX.XX/0 gaddr YY.YY.YY.YY/1341 laddr YY.YY.YY.YY/13...

Could any expert here able to give me a hand ? I'm totally new on asa 5505, because of my previous one broken.I would like to set this up with some static NAT rule located on 192.168.2.0 segment and two segment of internal network able to access Inte...

Hello everyone,Do you know someone if the NAC Manager supports SSO and LDAP authentication with Windows 2008 R2 Active Directory?Thank youMichal

Hi All,Please help me to configure FWSM in my VSS environment. I have two 6509s in my network, VSS is running in between. Each switch contains an FWSM module. I want to configure these modules with failover. What all things i need to consider before ...

I am able to access the ASA5510 device (8.2(2)) via ASDM (6.2(5)) from a PC at home (Windows 7, IE8, most recent java) but am unable to connect to the device from my work PC (also Windows 7, IE8). Each time after succesfully connecting to the VPN, my...

Please find my ASA config.hostname fw!interface Ethernet0/0 nameif NC_OUTSIDE security-level 0 ip address 192.168.36.250 255.255.255.0 !interface Ethernet0/1 nameif JA_OUTSIDE security-level 0 ip address 192.168.127.250 255.255.240.0 !interface Ether...

I ran the Output Interpreter on our 506e and got the following:WARNING: The IP address, 6x.172.214.193, of the 'outside' interface overlaps with the static defined by:     'static (inside, outside) 10.2.28.0 10.2.28.0 netmask 255.255.255.255'.Can som...

Hi,I have a coreswitch 6509 which is include IDSM-2 actully the core switch handle the traffice between the usres VLANs and the server Vlan (vlan 11)The users Vlan are (Vlan 2 , 3, 4, 5, 6 and 7). I need to configure the core switch and IDSM to be in...

When access the EC2 server from my network using sshclient and not type any coomand for minuts the connection is droped. Tested the access in same server from direct internet connection and don´t have same problem.Exist one specified configuration to...

Hello,I am trying to measure the performances of my ASA using a traffic generator (IXIA chassis) and in order to get "real-life" values (latency, throughput, etc), I need my firewall to be configured properly. I have then two questions:- Where can I ...