Hi ,i have installed IPS 4255 with version 7.0(2)E4 and using IME 7.0.2.i am not able to see the logs in the IME (Event Monitoring), but when i access it by CLI (show events) i can see the logs.i also tried to tune a signature for ICMP large packet t...
We are configuring an ASA5510 for the first time. However, we seem to have hit a wall. There seems to be no communication between the interfaces at all. We have played with the static routes and access rules to no avail, it just seems like nothing...
When configuring Active Standby ASA firewalls do you need a standby address? The problem I have is that we have a single customer WAN link with single IP address but two firewalls.I think the answer to my question is not to configure a Standby addres...
/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm ...
Is there a way to prevent the Floating Toolbar from popping up? We are using ASA 7.2(2)ThxZhenning
Currently running version 7.0 (8). Going to lease a ASA (max flash & DRAM) so that I can upgrade.I plan on upgrading the leased ASA to the latest & greatest version, my question is what version do I want to use ?
Hi all,We are using Secpath U200-M for DSL connection to internet , G0/1 is the outside and G0/2 is the LAN.We are able to access internet but unable to access outlook.Any suggestions please.thanks
Hello,is it possible to have on FWSM configuration like this:static (inside,outside) 10.0.0.0 10.0.0.0 netmask 255.255.255.0static (inside,outside) tcp 10.0.0.100 80 10.0.0.100 8080 netmask 255.255.255.255On outside interface i have clients in netwo...
Hi,I have installed permanant license of both nac collector and profiler.Also the collector versions are same at both end.(3.1.1.-18)I want to make network connections and ADD Collector in Nac profiler.Please guide me how to make the network connecti...
Where do the root certificates reside on the 3315 & 3355 for the CAM/CAS, respectively?
We're preparing for a migration to IPv6 and I am trying to find if there is a recommended ASA OS by Cisco to support IPv6. My firewall currently is running version 7.2(3). I know this version has IPv6 commands, but I want to make sure it supports e...
I cannot ping like "ping www.google.com" from PIX version 7.1Please help...........
i have installed an IPS-SSM Module in the ASA but the module status is unresponsive. i tried to boot from tftp server many times using hw module 1 recover boot. but it doesn't work.the tftp server and the sensor are in the same subnet and vlan.i conf...
My internal network is 10.201.4.0/24I had a ASA5510 as my gateway, Its inside interface ip address is 10.201.4.254. And in asa5510,I set name server which provided by my ISP.All my internal computer use firewall's internal interface as gateway.But if...
I have NAC appliance CAM version 4.7(3) i want to reset it to its factory default or clea all configurationand the sme with the server.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 09-14-2026 04:42 AM | ||
| 08-25-2026 06:22 PM | ||
| 08-24-2026 12:26 AM | ||
| 08-20-2026 05:54 AM | ||
| 08-19-2026 07:59 AM |
| User | Count |
|---|---|
| 4 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
