Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I'm having trouble understanding if modifying the Email Alert is supported. I'm looking for a way to modify the alerts like in the Reporting function.
Does anyone know if that's possible?
I'm having issues on a switchport where an 2702I access-point is located. I can see CDP from the AP but no mac-adresses. The AP is powered via PoE from the switch.
The AP does have an IP address but are not visible on the WLC.
I find it very odd ...
Hi, I'm having issues as an customer have a power switch for a PoE switch where 3 AP's are linked up to, and they're getting turned on/ off multiple times a day. The issues is we have mail notifications set up, and this generates a lot of noise, so I...
Hi, I'm having issues understanding what AP radio colors mean, see attached image.I understand the radio with is 5GHz, and at first thought the color indicated some kind of error whereafter I checked the monitoring section of the AP and found no even...
Hi,First fixed appears to be 9.16.4.104 as per security advisory https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-tunnel-dos-s6mgkb75
Hi rnan,
Thank you for link. However I am already aware of that configuration guide and have thoroughly read it. My question is really if I'm able to modify the intrusion and malware alerts like in the reporting and report template tool?
I'm able to see an ARP entry for the IP address however it belongs to a different IP. I'm afraid the 'faulty' AP is somehow stuck with the IP.
The 'faulty' AP is at a very remote location and I'm therefore unable to console into the AP.
I've only seen this issue on a single AP.
See attached images.
I'm not able to ping the IP.
From "sh int gi 1/0/17" it shows many unknown protocol drops which is actively increasing. Maybe some bug on the software on AP?
