Network Security

We just purchased a PIX 515 firewall and this is my first experience with Cisco equipment. I installed an extra Ethernet card, and when I boot the firewall I get a status message of:Maximum interfaces: 2Additional 1 interface(s) is(are) disabled.Did...

Has Cisco updated the syslod server (PFSS) for Windows 2000. The one that I have says it wants only Windows NT 4.0. Or for that matter a good, free/cheap syslogd for Windows 2000 that is available anywhere?Thanks,Eric

We are setting up a pix firewall with different clients and different networks off each network interface. What is the best way for each client to be able to remotely manage their servers without giving them access to anyone elses network? One-to-o...

What are some major differences between Cisco PIX and an IOS firewall? Thanks in advance.

Hi All ,This is our network diagram we plan to setup | |-----------ISP1 | | |---GW----| | | | |----------ISP2 | | Inside NW DMZ OusideOut network connected to 2 ISPs and we plan to ...

We are going to multi-home w/ 2+ connections to different ISPs in different cities. I've got a lab setup, but am struggling with a design concept. I have 2 perimeter routers, 2 PIXs, and 2 internal routers that connect the two sites via our private f...

Here is my situation. My LAN users must enter either my Web server name or internal IP address to get to our Web site. The CEO wants to be able to type in the URL (company.com) to get to the site. I have our LAN protected from the outside world with...

I have to implement Pix firewall between two location. Will one Pix work for two location or I have to put two Pix at two location

Can PIX 515 connect to 2 outside router ? I mean that I can use one PIX 515 as 2 firewalls each one connected to an ISP Thanks for any help

i am having a problem which is the number of connections is growing om the pix over 300 000 connection ,the main problem that the idle connection does not be closed .if i make clear xlate nothing happend, i must reboot the pix

I have over a 1000 users going through a single T1. To limit the load Real Audio puts on this connection, I would like to block Real Audio. How do I do this?Gary

After upgraded from v5.3 to v6.0, I found the following log messages:<166>Sep 14 2001 15:35:45: %PIX-6-106015: Deny TCP (no connection) from 192.168.140.63/139 to 192.168.140.61/1507 flags PSH ACK on interface inside<166>Sep 14 2001 15:35:48: %PIX-6...

Which product would you use for establishing VPN connections between corporate offices? Why?

I am running the pix 506 with windows nt 4.0 and the vpn client. I have 10 outside users that need to login to the server through the pix. Right now they access the network through their internet connection. Then after they connect to there interenet...

How works enterprise nMAnager for SQL mamagement if there is a pix between the client with this software and the sql server?