cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
221
Views
0
Helpful
1
Replies

brand new ASA5505 cannot connect with ASDM

jason.ip1
Level 1
Level 1

Hi All,

 

I have got an new ASA 5505 and trying to config with ASDM, following all the procedure in the startup guide, but still cannot connect to ASDM, the firefox showing "ssl_error_no_cypher_overlap", and the CLI config show below, please help:

 

ciscoasa#
ciscoasa# sh run
: Saved
:
ASA Version 8.3(2)
!
hostname ciscoasa
enable password CJtjRGPJ2serkdPl encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 192.168.1.1 255.255.255.0
!
interface Vlan2
 nameif outside
 security-level 0
 ip address dhcp setroute
!
interface Ethernet0/0
 switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
object network obj_any
 subnet 0.0.0.0 0.0.0.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
!
object network obj_any
 nat (inside,outside) dynamic interface
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 192.168.1.5-192.168.1.254 inside
dhcpd enable inside
!

threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum client auto
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
  inspect ip-options
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:2d47d3da8d09ba7057cb47ba8de5a1b5
: end
ciscoasa#
ciscoasa#

 

1 Reply 1

You need to define an ASDM image

asdm image disk0:<image_name>

You might also need to define what authentication to use for the ASDM

aaa authentication http console LOCAL

If you are still having problems issue the following command

ssl encryption 3des-sha1 des-sha1 rc4-md5 aes128-sha1 aes256-sha1

--

Please remember to select a correct answer and rate helpful posts

--
Please remember to select a correct answer and rate helpful posts
Review Cisco Networking for a $25 gift card