Can one Cisco IPS 4360 connect to two different ISP circuits?
Currently our network has two circuits from two different ISPs, with two firewalls in the middle of the ISPs and the corporation internal network. We are thinking of purchasing a Cisco IPS 4360 and put the device between the ISPs and the two firewalls.
We would like the traffic coming to/from ASA1 still use the circuit from ISP1, and ASA2 still use the circuit from ISP2. Is this possible? Can the 4360 route the traffic as we want?
I drew a draft picture of this issue. Please have a look at the attachment.
Radius server configuration for 802.1XServer radius test1Address ipv4 10.1.1.1Key 1234!Server radius test2Address ipv4 10.1.1.2Key 1234!aaa group server radius TEST-grserver name test1server name test2!aaa authentication dot1x default group TEST-graaa aut...
One of the biggest concept in VPN Technologies is NAT Traversal, like NAT Traversal in VOIP deployment with SIP Protocol, the history is always inside the payload to solve the Incompatibility between NAT and IPSEC like the Incompatibility between SIP prot...
"What is this 'Orbital Query Corner' thing", you ask? It's the name of an occasional series of articles, each discussing one particular point or use case for the Orbital advanced search feature that is available in Cisco Secure Endpoint starting at ...
0. The Issue
On 20 July 2021, Microsoft issued an alert for CVE-2021-36934 "Windows Elevation of Privilege Vulnerability".  The problem in this case is an overly permissive Access Control List (ACL) applied to system files, including the Se...