cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

783
Views
5
Helpful
2
Replies
Highlighted
Enthusiast

Cannot input data from AD to ISE

HI I want to input data from Active Directory to ISE. Now I notice the issue is both ISE and AD cannot integrate well. Please see the picture below. The correct domain is abcd.local, but what i can see is ISE1.ise1.com instead of ISE1.abcd.local. Can we change the ISE1.ise1.com into ISE1.abcd.local? Thank you

 

Capture.PNG

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Mentor

Hi @Davidospf 

ise1.com is the domain name specified during build, you'd need to go to the CLI (console or SSH) and change the domain name. The self-certificates will be regenerated.

 

https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/cli_guide/b_ise_CLIReferenceGuide_24/b_ise_CLIReferenceGuide_24_chapter_011.html#wp3880504682

 

FYI, ISE does not necessarily need to be in the same name space as AD.

 

HTH

View solution in original post

2 REPLIES 2
Highlighted
VIP Mentor

Hi @Davidospf 

ise1.com is the domain name specified during build, you'd need to go to the CLI (console or SSH) and change the domain name. The self-certificates will be regenerated.

 

https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/cli_guide/b_ise_CLIReferenceGuide_24/b_ise_CLIReferenceGuide_24_chapter_011.html#wp3880504682

 

FYI, ISE does not necessarily need to be in the same name space as AD.

 

HTH

View solution in original post

Highlighted

Great! Thank you Rob

Content for Community-Ad